We design and install full EWI systems across Burnley — insulation board, adhesive, mechanical fixings, base coat with mesh, then a through-coloured silicone topcoat.
Why EWI in Burnley?
Because the insulation sits outside the structure, the wall stays warm — eliminating cold-bridging and internal condensation.
Local context: Burnley, Lancashire
Stone-built mill terraces dominate inner Burnley; outer estates carry rough-cast and pebbledash now reaching end-of-life. Pennine valley exposure with extremely high rainfall — vapour-open systems are essential. We cover the full Lancashire area from BB10 outwards, including Padiham, Briercliffe, Worsthorne, Cliviger, Brunshaw and the wider postcodes (BB10, BB11, BB12). Most Burnley jobs are surveyed within 48 hours — we know the streets, parking constraints around landmarks like Burnley Town Hall, and the typical substrates we'll find on the wall.
Benefits
- Long-life system when detailed properly.
- Major reduction in heating bills.
- Eliminates cold bridging and most internal condensation.
- Brand-new render façade included.
- Significant EPC uplift.
- Improves acoustic performance.
Local considerations
- EWI changes the external footprint of the building by 100–200mm — windows, sills, rainwater goods and roof overhang all need designing in.
- Get the breathability right — for older solid-wall properties in Burnley, mineral wool with a silicone topcoat is usually safer than EPS.
- Reveals, sills and drip beads are where EWI fails. We detail these properly; many cheap installers don't.
- Plan for moved rainwater goods, soil stacks and meter boxes — the project is more than just 'boards and render'.
- EWI on a damp wall just traps the damp. Cure the damp problem first.
Our process in Burnley
- Detailed survey — substrate test, U-value calc, thermal modelling if needed.
- Design board thickness, finish, beads, fixings.
- Scaffold and full mask-off.
- Adhesive-bed and mechanically fix insulation boards (typically EPS or mineral wool).
- Base coat with embedded mesh, all corners and reveals detailed.
- Through-coloured silicone topcoat — sample on the wall first.
- Snag, photo handover, scaffold strikes.
Areas we cover from Burnley
We work across Burnley (BB10, BB11, BB12) and the surrounding areas:
Frequently asked questions
Are there grants available?
Grant schemes change. Ask on enquiry — if there's an active scheme that fits your Burnley property, we'll point you to it.
How much can EWI save on bills in Burnley?
Typically 25–35% off heating demand for solid-wall properties. The exact figure depends on current insulation, heating system, and how the house is used.
What thickness of insulation do you use?
Most Burnley projects sit between 90mm and 150mm, depending on the U-value target and existing detailing. We size it on survey.
Does EWI need planning permission in Burnley?
Usually no for like-for-like exteriors on standard housing, but conservation areas and listed properties need checking. We'll advise on survey.
Can EWI fix damp?
EWI eliminates cold-bridging condensation — the most common cause of 'damp' patches on solid walls. It doesn't fix rising or penetrating damp, which need addressing separately.
What's the typical job duration?
Most semis in Burnley: 2–3 weeks on site including scaffold. Larger detached: 3–5 weeks.
Call now to lock in a survey slot. We'll discuss colour, finish, scaffold and timing on the visit.
If your Burnley property is solid-wall and cold, EWI is almost certainly the single best upgrade you can make. Get a free survey.